Colossal Avian

Overview

Colossal Avian is Parts & Wreck's Senior Year 30lb Robot.

Chassis

Overview

Colossal Avian uses an iRobotics classic waterjet cut tab and slot 2024 Aluminum chassis. The exterior panels are all 1/2" thick, with 1/8" thick top and bottom plates and 3/8" thick for the interior upright panels. The first iteration of the chassis utilized 0.75" UHMWPE side armor with 3d printed TPU rear armor. After NHRL, the side armor was combined into the rear armor pieces into one large 3d printed TPU piece.

Drive

Overview

Colossal Avian features a indirect drive drivetrain where the motor is belted to two wheels on each side, helping to isolate the motor from impacts. The wheels both ride on cantilevered shoulder bolts, which act as the drive axles. The cantilever design allows the drive axles to be completely isolated from the outer armor, meaning that the wheelguards can be completely ripped apart without impairing the drive functionality. The trade off is that the shafts themselves are less durable as they are not supported on two sides.

Components

• Motor: Flashhobby 3536 EVO 1450kv
• Gearbox: Repeat Drive Magnum
• Wheels: TPU wheel hub with Vytaflex 40a tread
• Current Drive ESCs: Rhino AM32 80A
  • Old ESCs: Neutron RC 70A AM32 Note: Had many destroyed ESCs of this kind at Robobrawl, could be due to a firmware bug for this specific ESC for firmwares AM32 V2.0 to V2.09

Weapon Disk

Components

• Disk Motor: BadAss 2826 1030 Kv
• Disk ESC: Castle Mamba X
• 1/2" AR500 Weapon Disk from Send Cut Send

Arm

Components

• Gearbox: 48:1 HD 57 Sport
• Arm Motor: BadAss 3520 970 Kv
• Arm ESC: Castle Mamba X
• #35H Chain

Learnings

Failures

• The developed cush drive did not provide enough impact absorption to the arm mechanism.
  • Resulted in broken chain, and damaged gearboxes
  • A proper slipping clutch or a better designed impact absorption mechanism is required to withstand the dynamic forces from sudden decceleration upon impact

Media

https://www.youtube.com/watch?v=dvcBMl0xzQ0